| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Author Index > Browse Articles > Author Index

Author is indexed since 2016

Author :
Heon-Young Ha 2 Articles
870 Evaluation of the Protective Ability of Air-formed Oxide and Passive Films Formed on Nb-Bearing High Interstitial Stainless Steels
Nb 활용 탄질소 스테인리스강의 부동태 및 대기산화 피막 보호성 연구
Chang-Geun Lee, Heon-Young Ha, Tae-Ho Lee, Kyung-Mox Cho
이창근, 하헌영, 이태호, 조경목
Korean J. Met. Mater. 2017;55(12):870-879.   Published online 2017 Dec 4
DOI: https://doi.org/10.3365/KJMM.2017.55.12.870

Abstract
The effects of Nb on grain refinement and the pitting corrosion resistance of Febalance18Cr10 Mn0.3C0.3NxNb (x = 0.1 and 0.2 wt%) high interstitial alloys were investigated through microstructure analysis and potentiodynamic polarization tests. The resistance to pitting corrosion of the two alloys, covered with a passive film and an air-formed..... More

    
470 Acceleration of Nano-Sized NbC Precipitation and Improvement of Creep Resistance in Alumina-Forming Austenitic Stainless Steel via Cold Working
Alumina-Forming 오스테나이트계 스테인리스강의 냉간가공을 통한 미세 NbC 석출 촉진과 크리프 특성 향상
Hyun Hwa Park, Jun Yun Kang, Heon-Young Ha, Tae-Ho Lee, Hyun Uk Hong
박현화, 강전연, 하헌영, 이태호, 홍현욱
Korean J. Met. Mater. 2017;55(7):470-476.   Published online 2017 Jul 4
DOI: https://doi.org/10.3365/KJMM.2017.55.7.470

Abstract
A feasibility study on microstructure design has been carried out to improve creep rupture life in alumina-forming austenitic (AFA) Fe-14Cr-20Ni-2.3Al stainless steel with and without 2 wt% W addition. After creep tests under 780 °C/80 MPa conditions, it was observed that internal cracks initiated primarily from grain boundaries in the..... More

       Crossref 6
E-Submission
Email Alert
Author's Index
Specialties
Journal Impact Factor 1.1
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI