Korean Journal of Metals and Materials

Korean Journal of Metals and Materials Search

> Browse Articles > Search

Influence of Si and Al contents and isothermal treatment condition on the microstructure and tensile properties in ultra-high strength Fe-0.2C-2.0Mn martensite-bainite complex phase steels
Si 및 Al 함량과 항온열처리조건이 초고강도 마르텐사이트-베이나이트 Fe-0.2C-2.0Mn 복합조직강의 미세조직과 인장특성에 미치는 영향

Eung Hyuk Lee, Chang Jae Yu, Hong-Bum Lee, Ji-Hoon Kim, Dong-Woo Suh
이응혁, 유창재, 이홍범, 김지훈, 서동우

Korean J. Met. Mater. 2021;59(9):602-612. Published online 2021 Aug 4
DOI: https://doi.org/10.3365/KJMM.2021.59.9.602

Abstract
This study investigated the influence of partial replacement of Si by Al on the microstructure and tensile properties of ultra-high strength steels with martensite-bainite complex microstructure produced by austenitization and subsequent isothermal heat treatment around M_s temperature. When the isothermal heat treatment was done below the M_s temperature, the fraction..... More

Web of Science 5 Crossref 5

Influence of Carbon Content and Isothermal Heat Treatment Temperature on the Microstructure and Mechanical Properties of Ultra-High Strength Bainitic Steels
초고강도 베이나이트강의 미세조직과 기계적 성질에 미치는 탄소함량과 항온열처리 온도의 영향

Seung Hwangbo, Hong-Bum Lee, Young-Beum Song, Jinhee Ham, Hong-Kyu Kim, Dong-Woo Suh
황보승, 이홍범, 송영범, 함진희, 김홍규, 서동우

Korean J. Met. Mater. 2019;57(6):335-342. Published online 2019 May 16
DOI: https://doi.org/10.3365/KJMM.2019.57.6.335

Abstract
The effect of carbon content and isothermal heat treatment conditions on the microstructure evolution and mechanical properties of ultra-high strength bainitic steels was investigated. A reduction in carbon content from 0.8 wt% to 0.6 wt% in super-bainite steel with typical chemistry effectively improved not only the Charpy impact toughness but..... More

Web of Science 1 Crossref 1

Temperature Dependency of the Tensile Characteristics and Transition of Fracture Behaviors in a Novel Infiltrated TiC-SKD11 Composites
TiC-SKD11 함침 복합재의 온도에 따른 인장 특성과 파괴거동 변화

Nu-Ri Oh, Sang-Kwan Lee, Seung-Chan Cho, Il-Guk Jo, Keum-Cheol Hwang, Dae-Ha Kim, Young-Tae Cho, Dong-Woo Suh, Hyun-Uk Hong
오누리, 이상관, 조승찬, 조일국, 황금철, 김대하, 조영태, 서동우, 홍현욱

Korean J. Met. Mater. 2017;55(3):156-164. Published online 2017 Mar 3
DOI: https://doi.org/10.3365/KJMM.2017.55.3.156

Abstract
A composite having 60 vol% of TiC particles was successfully fabricated by the infiltration of molten SKD11 tool steel into a TiC preform. The density of this composite was achieved to be 25% lighter than conventional steels. The penetration of the liquid metal reached geometrically complex regions without any interfacial..... More

1 |

Journal Impact Factor 1.1

The Korean Institute of Metals and Materials

Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071 FAX: +82-2-557-1080 E-mail: metal@kim.or.kr

About | Browse Articles | Current Issue | For Authors and Reviewers