Abstract
The effect of annealing on the microstructural evolution of the matrix in low carbon manganese steels with different initial microstructures, including martensite, bainite and a mixture of ferrite and pearlite, was investigated in conjunction with the charge in mechanical properties. During annealing, steels with a deformed ferrite + pearlite microstructure..... More

Abstract
Nickel-based superalloys have excellent resistance to extreme environments such as high temperature and high stress and are used as materials for large gas turbines. In this paper, specimens were taken from a blade that had been used for a long time, and their life span was studied by analysis of microstructure...... More

Abstract
Recently developed ultra-strong GIGA STEEL exhibites superior mechanical properties, with a high tensile strength of more than 1.5 GPa and good impact toughness. Nevertheless, its application to auto parts has been severely restricted, mainly due to a substantial reduction in the resistance to hydrogen embrittlement (HE) induced by aqueous corrosion...... More

Abstract
This study evaluated the relationship between reheat cracking that occurs in the reheated weld zone formed by subsequent multi-pass welding and the preheat/interpass temperature. The multi-pass weldment was YP 690 MPa high-strength steel, which is used in mobile offshore platform units. The welding process was flux-cored arc welding (FCAW), which..... More

Abstract
Martensitic 10Cr1MoW steels are widely used for high temperature components in turbine engines because they have good mechanical properties and corrosion resistance. Delta-ferrite can form locally in large ingots and the ferrite phase degrades the metal’s high-temperature properties. To decrease the fraction of delta-ferrite the solidification process should be controlled...... More

Abstract
This study designed a counter current extraction process for comparing the separation efficiencies that are obtained using Cyanex 572 and PC88A for the elements in a Pr and Nd mixed solution. This process involves multiple extraction and scrubbing processes using a mixer settler. The process parameters are calculated using an..... More

Abstract
Severe resistivity size effect in Cu interconnects is attributed to the relatively long bulk electron mean free path (39 nm at 298 K), which is inherently determined by phonon scattering. In this regard, Ru and Co have been recently considered as attractive alternatives for next-generation interconnect materials because the significantly..... More

Abstract
TaF₅ and VCl₃ were chosen as additives to enhance the hydrogen uptake and release rates of Mg. The total content of the additives was not more than 10 wt% since too high content reduces the fraction of Mg and thus the hydrogen storage capacity of the alloys. Samples with compositions..... More

Abstract
In our previous work, samples with a composition of 95 wt% Mg + 5 wt% CMC (Carboxymethylcellulose, Sodium Salt, [C₆H₇O₂(OH)_x(C₂H₂O₃Na)_y]_n) (named Mg-5 wt%CMC) were prepared through hydride-forming milling. Mg-5 wt%CMC had a very high hydrogenation rate but a low dehydrogenation rate. Addition of Ni to Mg is known to increase..... More

Abstract
The impressed current cathodic protection (ICCP) is widely used for preventing galvanic corrosion and it strongly influences the underwater electromagnetic signals of a surface ship. For military use, the signals should be reduced to avoid threats such as modern naval weapons triggered by the signals. We analyzed the underwater electric..... More