Abstract
In the present study, new Mg-based bulk metallic glasses have been developed in a Mg-Cu-GdNd based system using a Mg-Nd byproduct obtained from the recycling process of NdFeB magnet scrap through liquid metal extraction. The Mg-Cu-Gd-Nd bulk metallic glasses with a diameter of 2 mm are fabricated by injection casting..... More

Abstract
High-Mn steels developed for offshore industries require good resistance to stress corrosion cracking (SCC) in seawater. Elements like Cr and N are often added to improve the resistance to SCC. In this study, the SCC behavior of Fe18Mn3Cr0.1N and Fe19Mn19Cr0.6N steels in artificial seawater was examined. Slow strain rate tests..... More

Abstract
The microstructural evolution and corresponding mechanical properties of 5052 Al alloys with different deformation temperatures and post-deformation annealing conditions were investigated. The warmrolled alloy showed higher strength and elongation than the cold-rolled and cryo-rolled alloys. The improved strength and ductility of warm rolled alloys is attributed to the formation of..... More

Abstract
Electroplating chromium films in a trivalent chromium bath has been extensively investigated as a replacement for the conventional hexavalent chromium bath. However, commercialization of the trivalent chromium method has been hindered because the resulting chromium films exhibit inferior mechanical properties compared to hexavalent chromium coated film. In this study, we..... More

Abstract
Cast Ti–44Al–6Nb–2Cr–0.3Si–0.1C alloy having good air-oxidation resistance was corroded under 1 atm of flowing 0.2%SO₂/Ar gas at 900-1100 ^oC for 50-300 h in order to examine its corrosion behavior in a SO₂-containing environment, because SO₂ is an industrially important by-product in the field of combustion and processing of fossil fuels...... More

Abstract
Electrodialysis was used to develop a highly efficient process for concentrating and recovering Li from the Li-containing waste solution that is generated after recovering Co and Ni from a leach solution of waste cathode materials of Li ion batteries. The optimum conditions were investigated by comparing the concentration of Li..... More

Abstract
The dehydrogenation rates of graphene-added Mg (named Mg-5graphene) were very low at 573 K and 593 K. Ni was added to increase the dehydrogenation rates of graphene-added Mg. Samples (designated as Mg-2.5Ni-2.5graphene) with a composition of 95 wt% Mg + 2.5 wt% Ni + 2.5 wt% graphene were prepared by..... More

Abstract
Herein we report the effect of Cu/In doping on the electronic and thermal transport properties of Bi-Sb-Te thermoelectric alloys. To closely examine the role of each doping element when incorporated in a Bi_0.4Sb_1.6Te₃ alloy, different groups of samples were prepared and characterized, including undoped Bi_0.4Sb_1.6Te₃, In single-doped samples and In..... More

Abstract
Open-pored metal foams have been partly used for orthopedic or dental applications because of their good bone ingrowth behavior and low elastic modulus. In this paper, we report a method that can produce open-pored Ti foams using a technique that combines the powder injection molding process and feedstocks containing expandable..... More