Abstract
Recently, strengthened environmental regulations have required the downsizing of gasoline engines, and as a result, demand for gasoline turbochargers has rapidly increased. The vane of a turbocharger controls the flow of gases toward the turbine, and it is manufactured by powder metallurgy due to its complex shape. Gasoline engines have..... More

Abstract
To analyze the effects of intercritical heat treatment on the temper embrittlement of SA508 Gr.4N steels, two model alloys with different phosphorus (P) contents were fabricated. Each sample was heat treated by applying a conventional heat treatment process (quenching-tempering) with/without an intercritical heat treatment process (IHT) and a step-cooling heat..... More

Abstract
The addition of expensive elements to β titanium alloys, which are widely used in the aerospace and automobile industries, causes their price to increase. Low-cost, high-strength alloy (Ti-12.1Mo-1.0Fe) was designed in this study and the compressive behaviors of this alloy were evaluated for application to automobile parts, etc. As a..... More

Abstract
To suppress Ag dewetting from around 200 ^oC in Ag-coated Cu (Cu@Ag) flakes, Ag and Ni-coated Cu (Cu@Ni@Ag) flakes were fabricated by successive Ni and Ag electroless plating. The Ni bath type was an important consideration to induce differences in the Ag dewetting and resultant Cu oxidation. An acid Ni..... More

Abstract
In this study, AISI 316L stainless steels were manufactured by the L-DED process with various laser scanning speeds and laser powers, in order to analyze how volumetric energy density (VED) can affect their final shape, microstructure and mechanical properties. Under various VED conditions, it was found that a higher VED..... More

Abstract
This study aimed to investigate the effect of process parameters on the microstructure and mechanical properties of Inconel 625 alloy manufactured by direct energy deposition process. The Inconel 625 samples were produced by varying the laser scanning speeds from 720 - 960 mm/min while maintaining the same the laser energy..... More

Abstract
Mg₃Sb₂-based materials are promising candidates to replace n-type Bi₂Te₃ for cooling and power generation at low temperatures. Generally, the thermoelectric performance of a material is sensitively affected by synthesis process parameters, and among them, sintering temperature (T_s) is a critical one. In this study, n-type Mg₃SbBi_0.99Te_0.01 polycrystalline samples were fabricated..... More

Abstract
Polymer composites enriched with conductive fillers hold immense potential for flexible pressure sensors, because of the remarkable piezoresistive effect they possess. Research on polymer composite pressure sensors has been actively ongoing because of their flexibility and high electrical resistance performance. This paper presents a comprehensive comparison of the piezoresistive characteristics..... More

Abstract
Glass fiber-reinforced polymers (GFRPs) have attracted significant attention as structural materials because of their high fatigue resistance, corrosion resistance, strength, and stiffness. This study examined the effect of elevated temperatures (150, 250, 350, and 450oC) on the microstructural and mechanical properties of GFRP plates. The number of bubbles increased as..... More