| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Korean Journal of Metals and Materials > Volume 59(5); 2021 > Article
Erratum to: 니알브론즈의 기계적 특성에 미치는 알루미늄 및 지르코늄 함량의 영향
Erratum

Korean Journal of Metals and Materials 2021; 59(5): 354.

Published online: April 26, 2021

DOI: http://dx.doi.org/10.3365/KJMM.2021.59.5.354

Erratum to: 니알브론즈의 기계적 특성에 미치는 알루미늄 및 지르코늄 함량의 영향

안지혁1, 김동욱2, 김민수1, 황종현2, 한승전1,*

1한국기계연구원 부설 재료연구소 소재실용화연구실

2현대중공업 생산기술연구소

Erratum to: Effect of Al and Zr Contents on Mechanical Properties of Ni-Al-Bronze

Jee Hyuk Ahn1, Dong Wook Kim2, Min Soo Kim1, Jong-Hyun Hwang2, Seung Zeon Han1,*

1Commercialization Research Division, Korea Institute of Materials Science, Changwon 51508, Republic of Korea

2Industrial Technology Institute, Corporate Technology Institute, Hyundai Heavy Industries Co., Ltd, Ulsan 682-792, Republic of Korea

*Corresponding Author: Seung Zeon Han
Tel: +82-55-280-3331, E-mail: szhan@kims.re.kr

Copyright © 2021 The Korean Institute of Metals and Materials

This is an Open Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0/) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Erratum

“니알브론즈의 기계적 특성에 미치는 알루미늄 및 지르코늄 함량의 영향, 대한금속·재료학회지, Vol. 55, No. 8 (2017), pp.537-543, https://doi.org/10.3365/KJMM.2017.55.8.537 ”의 그림 7(a)와 (d)를 저자의 요청으로 아래와 같이 수정합니다.

Fig. 7.

[수정 전]

(a) Measured α phase fraction and average grain size of the Ni-Al-Bronze alloys with different zirconium contents. Tensile strength and elongation of Ni-Al-Bronze alloys with different (b) zirconium contents, (c) α phase fraction and (d) average grain size.
kjmm-2021-59-5-354f1.jpg
Fig. 7.

[수정 후]

(a) Measured α phase fraction and average grain size of the Ni-Al-Bronze alloys with different zirconium contents. Tensile strength and elongation of Ni-Al-Bronze alloys with different (b) zirconium contents, (c) α phase fraction and (d) average grain size.
kjmm-2021-59-5-354f2.jpg
TOOLS
PDF Links  PDF Links
PubReader  PubReader
ePub Link  ePub Link
Full text via DOI  Full text via DOI
Download Citation  Download Citation
  Print
Share:      
METRICS
0
Crossref
0
Scopus
3,166
View
47
Download
Related articles
Effect of Molybdenum on the Mechanical and Corrosion Properties of Ti-xMo-2Fe Beta Alloys  2024 February;62(2)
Effect of Oxygen Content on Microstructure and Mechanical Properties of Additive Manufactured Ti-6Al-4V  2023 September;61(9)
Effect of Mg Content and Cooling Rate After Solidification on the Mechanical Properties of T5-treated Al-Si-Mg Alloy  2023 July;61(7)
A Study on the Microstructures and Mechanical Properties of Ni-Cr-Mo-V Low Alloy Steels   2022 April;60(4)
Effect of Nickel Silicide Content on the Friction Properties of Wet Sintered Friction Material  2022 February;60(2)
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI