Abstract
In this study, novel non-skid Al-Al₂O₃ coatings with improved wear resistance were fabricated using twin wire arc spray (TWAS). TWAS Al coating was prepared as a reference sample and representative TWAS parameters (working distance, process gas pressure, arc current) were controlled to fabricate different Al-Al₂O₃ coatings. The Al-Al₂O₃ coatings showed..... More

Abstract
It is known that Ni-based superalloys possess superior mechanical properties in high-temperature and high-pressure environments. One of the drawbacks of these alloys is their tendency to oxidize at high temperatures. Improving their oxidation properties and obtaining a fundamental understanding of the underlying mechanism of their oxidation behavior are critical for..... More

Abstract
Concerns have arisen regarding the high concentrations of sodium sulfate in wastewater resulting from the waste Li-ion battery wet recycling process. In addressing this issue, Bipolar electrodialysis was employed to desalinate high-concentration sodium sulfate and recover it as sulfuric acid and sodium hydroxide. The investigation encompassed various experimental variables, such..... More

Abstract
: This study investigates the influence of surfactant (sodium dodecyl sulfate, SDS) concentration on the size and optoelectronic properties of poly(3-hexylthiophene) (P3HT) nanoparticles (NPs) synthesized via the mini-emulsion technique. P3HT NPs were fabricated with varying SDS concentrations. The size dependent optoelectronic properties, including the highest occupied molecular orbital (HOMO) and..... More

Abstract
Poly(3-hexylthiophene) (P3HT), a semiconducting polymer, is integral to the development of organic electronic devices. Its optoelectronic properties are significantly influenced by the nature of its intermolecular interactions, predominantly classified as J-type and H-type couplings. This study investigates the effect of sonication on the dielectric properties of P3HT, focusing on the..... More

Abstract
To improve the hydrogen-storage properties of Mg₂Ni, LiBH₄ was added by milling in hydrogen atmosphere (reactive mechanical milling, RMM). Mg₂Ni-10LiBH₄ was prepared with a composition of 90 wt% Mg₂Ni + 10 wt% LiBH₄. The quantity of released hydrogen (H_r) versus temperature T curve for Mg₂Ni10LiBH₄ was obtained by heating at..... More

Abstract
In this study, we enhanced the flexural strength of cordierite ceramics by incorporating h-BN (hexagonal boron nitride) nanoparticles, facilitated by the slip casting process. Initially, commercial cordierite powder with an average particle size of 10 mm underwent a ball-milling process to reduce the size to 2.5 mm and simultaneously achieve..... More

Abstract
The effects of post-annealing times at 150°C on the bonding strength and interfacial characteristics of Cu/Sn-3.0Ag-0.5Cu (SAC305)/Al were systematically evaluated. In the as-bonded sample, Cu₆Sn₅ intermetallic compound (IMC) was formed at the upper Cu/SAC305 interface, while Ag₃Al IMC was formed at the lower SAC305/Al interface, and a black layer of..... More