| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Korean Journal of Metals and Materials Search > Browse Articles > Search



Sintering Behavior and Mechanical Properties of Dispersed-Reinforced Fe-TaC Composites Produced by High Energy Ball Milling
고에너지 볼 밀링을 이용한 분산강화된 Fe-TaC 합금분말의 소결거동 및 기계적 특성평가
Bum-Soon Park, Jeong-Han Lee, Jae-Cheol Park, Sung-Kil Hong, Hyun-Kuk Park
박범순, 이정한, 박재철, 홍성길, 박현국
Korean J. Met. Mater. 2024;62(3):163-170.   Published online 2024 Feb 28
DOI: https://doi.org/10.3365/KJMM.2024.62.3.163

Abstract
In this study, a high-melting point element, tantalum carbide (TaC) was added to improve the mechanical properties and the oxidation/corrosion resistance of Fe. The Fe-TaC composites were synthesized by high energy ball milling for the mechanical alloying of the non-equilibrium phase (Fe-Ta) and the homogeneous dispersion of TaC. Fe-TaC composite..... More

                
Research on Thermal Properties and High Temperature Exposure Behavior of Non-Skid Coating Fabricated by Twin Wire Arc Spraying
Twin wire arc spray 용사코팅 공정을 통해 제작된 미끄럼 방지 코팅의 열적 특성 및 고온노출 거동 연구
Hansol Kwon, Youngjin Park, Uk Hee Nam, Eungsun Byon
권한솔, 박영진, 남욱희, 변응선
Korean J. Met. Mater. 2023;61(9):642-651.   Published online 2023 May 14
DOI: https://doi.org/10.3365/KJMM.2023.61.9.642

Abstract
Conventional non-skid coatings for marine construction contain polymeric materials. These materials are generally susceptible to high temperature environments because of their low thermal conductivity and thermal resistance. A metal-based non-skid coating has great potential for high temperature applications, yet, there has only been limited research. In this study, twin wire..... More

                   Web of Science 1  Crossref 1
Influence of Heat-Treatment on Microstructures and Mechanical Properties of CuCrFeMnNi High-Entropy Alloy
CuCrFeMnNi 고엔트로피 합금의 열처리에 따른 미세조직 및 기계적 물성 변화 연구
Hoseop Song, Sung Ho Song, Jaiyoung Cho, Gian Song
송호섭, 송성호, 조재영, 송기안
Korean J. Met. Mater. 2023;61(6):449-457.   Published online 2023 May 18
DOI: https://doi.org/10.3365/KJMM.2023.61.6.449

Abstract
High entropy alloys (HEAs) are defined as a multi-element alloy including more than 4 elements with near equi-atomic percentage. In general, the configurational entropy of the HEAs is known to be sufficient to stabilize a single solid solution, such as body-centered cubic (BCC), face-centered cubic (FCC) and hexagonal-closed pack (HCP)...... More

                
Comparative Research on Corrosion Resistant Non-Skid Al and Al-3%Ti Coating Fabricated by Twin Wire arc Spraying
Twin wire arc spray 용사코팅 공정을 통해 제작된 내부식성 Al 및 Al-3%Ti 미끄럼 방지 코팅의 비교 연구
Hansol Kwon, Youngjin Park, Uk Hee Nam, Eunkyung Lee, Eungsun Byon
권한솔, 박영진, 남욱희, 이은경, 변응선
Korean J. Met. Mater. 2023;61(4):242-251.   Published online 2023 Mar 22
DOI: https://doi.org/10.3365/KJMM.2023.61.4.242

Abstract
To ensure the lifetime of marine constructions and the safety of workers and pedestrians, corrosion protective non-skid coating is an effective solution. However, the conventional polymer-based coating has some limitations. In this study, newly-suggested Al and Al-3%Ti coatings were deposited on high strength low alloyed steel substrate using twin wire..... More

                   Web of Science 2  Crossref 2
Effect of Fe-Cr-B on the Microstructure and Mechanical Properties of a Powder Injection Molding Processed Fe-Cr-B/316L Stainless Steel Matrix Composite
분말 사출 성형된 Fe-Cr-B/316L 스테인레스강 복합재료의 미세조직과 기계적 특성에 미치는 Fe-Cr-B의 영향
Young-Kyun Kim, Yeun-Ah Joo, Tae-Shik Yoon, Kee-Ahn Lee
김영균, 주연아, 윤태식, 이기안
Korean J. Met. Mater. 2023;61(1):9-17.   Published online 2022 Dec 28
DOI: https://doi.org/10.3365/KJMM.2023.61.1.9

Abstract
Stainless steel-based composites (SMCs) mixed with 316L stainless steel powder and Fe-Cr-B based M alloys powder ed M) powder were manufactured using the powder injection molding (PIM) process, and their microstructure and mechanical properties were investigated. To examine the effect of M content on the properties of SMCs, the M..... More

                
Mechanical Properties and Microstructural Evolutions of High-Pressure Torsion-Processed Al7068 Alloy
고압비틀림 공정 처리된 Al7068 합금의 기계적 특성 및 미세조직 변화
Juhee Oh, Sujung Son, Hyoung Seop Kim, Jae Bok Seol, Hyokyung Sung, Jung Gi Kim
오주희, 손수정, 김형섭, 설재복, 성효경, 김정기
Korean J. Met. Mater. 2023;61(1):1-8.   Published online 2022 Dec 28
DOI: https://doi.org/10.3365/KJMM.2023.61.1.1

Abstract
The combination of severe plastic deformation, deformational heat, and frictional heat generated during the high-pressure torsion process has a great effect on microstructural evolutions, including grain refinement, dynamic recrystallization and recovery. In particular, the low melting temperature metallic alloys (e.g., aluminum and magnesium) also induce nano-precipitations in the matrix during..... More

                   Web of Science 1  Crossref 2
Electrical and Mechanical Properties of Polymer Composite through the Use of Single-Walled Carbon Nanotube and Multi-Walled Carbon Nanotube
단일벽 탄소나노튜브와 다중벽 탄소나노튜브 사용에 따른 고분자 복합체의 기계적, 전기적 물성
Byung-Ho Kang, Oh-Nyoung Hur, Soon-Kook Hong, Sung-Hoon Park
강병호, 허오녕, 홍순국, 박성훈
Korean J. Met. Mater. 2022;60(9):694-700.   Published online 2022 Aug 30
DOI: https://doi.org/10.3365/KJMM.2022.60.9.694

Abstract
To manufacture composites with required properties, it is extremely important to select an appropriate filler. Carbon-based nano materials such as carbon black, graphene and carbon nanotube (CNT) have been extensively investigated as reinforcing and conducting fillers. Because of their high aspect ratio coupled with superior physical properties, 1-dimensional CNTs are..... More

                   Web of Science 5  Crossref 5
Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys
Fe-17Mn-5Si-5Cr 형상기억합금의 형상복원거동 및 기계적 특성에 미치는 Ni, Ti 및 C의 영향
Dohyoung Kim, Yonghwan Kim, Jeong-Jung Oak, Junghoon Lee, Chan Hee Park, Wookjin Lee, Yongho Park
김도형, 김용환, 옥정중, 이정훈, 박찬희, 이욱진, 박용호
Korean J. Met. Mater. 2020;58(10):660-671.   Published online 2020 Oct 5
DOI: https://doi.org/10.3365/KJMM.2020.58.10.660

Abstract
Fe-Mn-Si based shape memory alloy is a new functional material that can be used to apply prestress to civil and structural components such as concrete structures. In this study, the effects of alloying elements Ni, C and Ti on the mechanical and shape memory properties of the alloy were investigated..... More

                   Web of Science 7  Crossref 7
Changes in Electrical Properties of Copper-Plated Layer by Organic Additives on High Current Density
고전류밀도에서 유기첨가제에 의한 구리 전착층의 전기적 특성 변화
Tae-Gyu Woo, Il-Song Park
우태규, 박일송
Korean J. Met. Mater. 2020;58(1):41-48.   Published online 2019 Dec 12
DOI: https://doi.org/10.3365/KJMM.2020.58.1.41

Abstract
Electroplating has many economic advantages in producing copper foils. The easiest way to manufacture electroplated copper foil with various properties is to add appropriate additives. This study evaluated the surface properties, mechanical and electrical properties of copper foil electroplated in electrolytes containing the leveler JGB (Janus Green B). When the..... More

                   Web of Science 8  Crossref 6
Microstructure and Mechanical Properties of Continuous Welded 50N Rail
Wookjin Choi, Min Ji Song, Nam-Hyoung Lim, Soo Yeol Lee
Korean J. Met. Mater. 2019;57(12):755-763.   Published online 2019 Dec 5
DOI: https://doi.org/10.3365/KJMM.2019.57.12.755

Abstract
Rails are subjected to repeated stresses due to wheel-rail contact during train service. Rails under stress conditions undergo microstructural changes, and these cause degradations of the structural integrity and lifetime of rails. In this study, three different rails (newly-manufactured rail, newly-manufactured head-hardened rail, and worn (used) rail) were compared to..... More

                
Fabrication of Open-Pored Titanium Foam for Biomedical Implants
생체의료 임플란트용 개기공 티타늄 다공체 제조
Gyeong-Uk Kim, Jin Man Jang, Yong-Dae Kim, Jae-Chul Lee, Wonsik Lee
김경욱, 장진만, 김용대, 이재철, 이원식
Korean J. Met. Mater. 2019;57(10):679-687.   Published online 2019 Sep 6
DOI: https://doi.org/10.3365/KJMM.2019.57.10.679

Abstract
Open-pored metal foams have been partly used for orthopedic or dental applications because of their good bone ingrowth behavior and low elastic modulus. In this paper, we report a method that can produce open-pored Ti foams using a technique that combines the powder injection molding process and feedstocks containing expandable..... More

                   Web of Science 3  Crossref 3
Mechanical Properties of Liquid Phase Sintered SiC Materials by the Addition of Unimodal and Bimodal Particles
단일 크기와 이중 크기의 탄화규소 입자를 이용한 액상소결 탄화규소의 기계적 특성
Jun Yeab Lee, Sang Pill Lee, Jin Kyung Lee, Moon Hee Lee, Seung Kuk Hwang
이준엽, 이상필, 이진경, 이문희, 황승국
Korean J. Met. Mater. 2019;57(1):60-66.   Published online 2018 Dec 14
DOI: https://doi.org/10.3365/KJMM.2019.57.1.60

Abstract
Both the mechanical properties and probability distribution of liquid phase sintered SiC (LPS-SiC) materials were investigated, based on a detailed analysis of their microstructures. In particular, the effect of the starting sizes of SiC particles on the characterization of LPS-SiC materials was evaluated. LPS-SiC materials were fabricated with a constant..... More

                   Web of Science 2  Crossref 2
Development of Rare-Earth Element Based High Entropy Bulk Metallic Glasses
희토류 원소계 고엔트로피 벌크 비정질 합금 개발
Jinyeon Kim, Hyun Seok Oh, Jinwoo Kim, Eun Soo Park
김진연, 오현석, 김진우, 박은수
Korean J. Met. Mater. 2018;56(1):14-25.   Published online 2018 Jan 1
DOI: https://doi.org/10.3365/KJMM.2018.56.1.14

Abstract
High entropy alloys (HEAs) are a relatively new class of metallic materials. HEAs lead to high mixing entropy and the formation of a simple solid solution rather than intermediate phases. This might be explained by the fact that the configurational entropy outweighs the enthalpy of formation of intermetallic compounds. Meanwhile,..... More

       Crossref 1
Fabrication and Mechanical Properties of WC Alloy Hard Materials by a Pulsed Current Activated Sintering Method
펄스통전활성 소결법 적용 WC 합금 소결체 제조 및 기계적 특성 평가
Jeong-Han Lee, Hyun-Kuk Park, Jun-Ho Jang, Sung-Kil Hong, Ik-Hyun Oh
이정한, 박현국, 장준호, 홍성길, 오익현
Korean J. Met. Mater. 2017;55(11):783-789.   Published online 2017 Oct 31
DOI: https://doi.org/10.3365/KJMM.2017.55.11.783

Abstract
In this study, planetary ball milled WC-5 wt%Co powders were sintered using the pulsed current activated sintering (PCAS) process. With this process, fully densified hard materials were obtained in a shorter time than conventional processes such as a HP and HIP. The particle sizes of the planetary ball milled WC..... More

       Crossref 1
Microstructure and Mechanical Properties of As-cast CoCrFeMnNi High Entropy Alloy
CoCrFeMnNi 고엔트로피합금 주조재의 미세조직 및 기계적 특성
Minju Kang, Jong Woo Won, Ka Ram Lim, Sang Hyeop Park, Seong Moon Seo, Young Sang Na
강민주, 원종우, 임가람, 박상협, 서성문, 나영상
Korean J. Met. Mater. 2017;55(10):732-738.   Published online 2017 Sep 28
DOI: https://doi.org/10.3365/KJMM.2017.55.10.732

Abstract
In this study, we made large-scale ingots of CoCrFeMnNi high entropy alloy by vacuum induction melting. The as-cast CoCrFeMnNi high entropy alloy contained a high proportion of columnar structures with a few equiaxed grains, and showed single phase fcc solid solutions without macro segregation and low interstitial levels. The tensile..... More

       Crossref 4
High Temperature Properties and Recent Research Trend of Mg-RE Alloys
Mg-RE계 고온용 합금의 특성과 최근 연구 동향
Soo Woo Nam
남수우
Korean J. Met. Mater. 2017;55(4):213-221.   Published online 2017 Apr 6
DOI: https://doi.org/10.3365/KJMM.2017.55.4.213

Abstract
For the applications in automotive, aircraft, aerospace, and electronic industries, the lightest structural Mg alloys have received much attention since 2000. There has been some progress for the improvement of the mechanical properties such as room temperature strength, formability and mechanical anisotropy. However, the high temperature strength of Mg alloys..... More

       Crossref 4
Mechanical Properties of Discontinuous Precipitated Al-Zn Alloys after Drawing at Room and Cryogenic Temperatures
불연속 석출된 Al-Zn 합금의 상온 및 극저온 인발에 따른 미세조직 변화가 기계적 특성에 미치는 영향
Min Soo Kim, Seung Zeon Han, Jehyun Lee, Sung Hwan Lim, Jee Hyuk Ahn, Sang-Shik Kim, Kwang Ho Kim
김민수, 한승전, 이재현, 임성환, 안지혁, 김상식, 김광호
Korean J. Met. Mater. 2017;55(2):77-84.   Published online 2017 Feb 2
DOI: https://doi.org/10.3365/KJMM.2017.55.2.77

Abstract
In order to study the effect of microstructural change on the tensile properties of discontinuous precipitated Al-Zn binary alloy, four different Al-Zn alloys(25, 30, 35, 45 wt% Zn) were aged at 160 ℃ for different aging times(0, 5, 15, 30, 60, 120, 360 min) after being solution treated at 400..... More

       Crossref 3
Effect of Configurational Entropy of Mixing on Thermophysical Properties in Single Phase FCC Solid Solutions with Multi-Principal Elements
혼합엔트로피 제어에 따른 단일 FCC 고용체 합금의 물성변화 분석
Je In Lee, Hyun Seok Oh, Jun Hyuk Kim, Eun Soo Park
이제인, 오현석, 김준혁, 박은수
Korean J. Met. Mater. 2017;55(1):1-9.   Published online 2017 Jan 5
DOI: https://doi.org/10.3365/KJMM.2017.55.1.1

Abstract
In the present study, we systematically investigated the effect of entropy of mixing (ΔSmix) on the mechanical and thermal properties of single phase FCC solid solutions with multi-principal elements. An increase in ΔSmix led to an increase in micro-hardness and a decrease in thermal conductivity (κ) due to severe lattice..... More

       Crossref 8
Microstructure and Mechanical Properties of Continuous Welded 50N Rail
Wookjin Choi1, Min Ji Song1, Nam-Hyoung Lim2, and Soo Yeol Lee1,*

Abstract
Rails are subjected to repeated stresses due to wheel-rail contact during train service. Rails under stress conditions undergo microstructural changes, and these cause degradations of the structural integrity and lifetime of rails. In this study, three different rails (newly-manufactured rail, newly-manufactured headhardened rail, and worn (used) rail) were compared to... More
Microstructure and Mechanical Properties of Continuous Welded 50N Rail
Wookjin Choi1, Min Ji Song1, Nam-Hyoung Lim2, and Soo Yeol Lee1,*

Published online 1999 Nov 30
Abstract
Rails are subjected to repeated stresses due to wheel-rail contact during train service. Rails under stress conditions undergo microstructural changes, and these cause degradations of the structural integrity and lifetime of rails. In this study, three different rails (newly-manufactured rail, newly-manufactured headhardened rail, and worn (used) rail) were compared to... More
Microstructure and Mechanical Properties of Continuous Welded 50N Rail
Wookjin Choi1, Min Ji Song1, Nam-Hyoung Lim2, and Soo Yeol Lee1,*

Published online 1999 Nov 30
Abstract
Rails are subjected to repeated stresses due to wheel-rail contact during train service. Rails under stress conditions undergo microstructural changes, and these cause degradations of the structural integrity and lifetime of rails. In this study, three different rails (newly-manufactured rail, newly-manufactured headhardened rail, and worn (used) rail) were compared to examine the effects... More
Microstructure and Mechanical Properties of Continuous Welded 50N Rail
Wookjin Choi, Min Ji Song, Nam-Hyoung Lim, Soo Yeol Lee
Published online 1999 Nov 30
Abstract
Rails are subjected to repeated stresses due to wheel-rail contact during train service. Rails under stress conditions undergo microstructural changes, and these cause degradations of the structural integrity and lifetime of rails. In this study, three different rails (newly-manufactured rail, newly-manufactured head-hardened rail, and worn (used) rail) were compared to... More
Microstructure and Mechanical Properties of Continuous Welded 50N Rail

Published online 1999 Nov 30
Abstract
Rails are subjected to repeated stresses due to wheel-rail contact during train service. Rails under stress conditions undergo microstructural changes, and these cause degradations of the structural integrity and lifetime of rails. In this study, three different rails (newly-manufactured rail, newly-manufactured head-hardened rail, and worn (used) rail) were compared to... More
1 |
E-Submission
Email Alert
Author's Index
Specialties
Journal Impact Factor 1.2
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI