Abstract
Two welding methods of FCAW (Flux-cored arc welding) + FCAW, and FCAW + GTAW (Gas tungsten arc welding) were compared to identify effective routes for STS 316L/A516-70N clad stainless steel. Since the welding speed of the FCAW + GTAW welding method is slower than that of the FCAW + FCAW..... More

Abstract
In this study, we tried to understand the difference in the mechanical properties (elastic modulus, E & hardness, H) values of CIGS compound semiconductors measured using the Berkovich indenter and the sharper cube corner and conical indenter. Adopted continuous stiffness measurement technique to characterize it along with the indentation depth...... More

Abstract
General austenitic stainless steel has a problem with intergranular corrosion due to volatilizing chromium, which forms chromium carbide in a high temperature environment. By adding titanium as an alloying element, STS 321 stainless steel has excellent creep resistance and intergranular corrosion resistance at high temperatures, because the formation of chromium..... More

Abstract
The recycling of critical metals like cobalt and nickel from spent lithium-ion batteries (LIBs) is of immense importance in sustainable manufacturing. This work aims to purify Co(II) and Ni(II) present in acidic and ammonia solutions using ion exchange. AG-1-X8 resin modified with thiocyanate anions (R₄N⁺SCN⁻ resin) was used to separate..... More

Abstract
Bi₂O₂Se oxyselenide has been actively studied as a potential n-type thermoelectric material because of its intrinsically low thermal conductivity and high Seebeck coefficient (S). However, Bi₂O₂Se has very low electrical conductivity (σ), resulting in relatively poor thermoelectric performance. Herein, we investigate the effect of Cu addition on the electrical and..... More

Abstract
Re₂Te₅ is considered a potential thermoelectric material because of its intrinsically low thermal conductivity, due to its complex crystal structure. Herein, a series of Se-doped Re₂Te₅ (Re₂Te_5-xSe_x, x = 0, 0.2, 1, and 2) samples were synthesized, and their electrical and thermal transport properties were investigated. Pure orthorhombic Re₂Te₅ phases..... More

Abstract
We investigated the effect of Ni doping on the electrical, thermal, and thermoelectric transport properties of FeSe₂ polycrystalline alloys. FeSe₂ alloys exhibit both n-type and p-type conduction at different temperatures and thus their practicality as a thermoelectric material is somewhat limited. In this study, Fe_1-xNi_xSe₂ polycrystalline samples with x =..... More

Abstract
In recent decades, many research efforts have been devoted to developing high-performance stretchable strain sensors due to their potential for application in various emerging wearable sensor systems. This work presents a facile yet highly efficient way of modulating the sensing performance of a thin metal film/conductive composite hybrid piezoresistor-based stretchable..... More

Abstract
In order to investigate the mechanical properties of the developed wrought γ'-hardened Ni-based superalloy, LESS alloy (Low Eta Sigma Superalloy), and to understand the deformation behavior, tensile tests were carried out from room temperature to 800oC in comparison with IN 740H alloy. Like other superalloys, the tensile properties of the..... More